Preparation and characterization of sorbents prepared from ash (waste material) for sulfur dioxide (SO2) removal

Sorbents synthesized from various types of ash (coal fly ash, coal bottom ash, oil palm ash, and incinerator ash) for flue gas desulfurization were investigated. The sorbents were prepared by mixing the ashes with calcium oxide and calcium sulfate using the water hydration method. The effects of various sorbent preparation variables, such as the hydration period, the ratio of calcium oxide to ash, and the amount of calcium sulfate, on the Brunauer-Emmett-Teller (BET)-specific surface area of the resulting sorbent were studied using a two-level full factorial design. The surface area of the sorbents obtained range from 15.4 to 122.1m²/g. Regression models were developed to correlate the significant variables to the surface area of the sorbents. An analysis of variance (ANOVA) showed that the model was significant at a confidence level of 95%. It was found that apart from all the individual variables studied, interactions between variables also exerted a significant influence on the surface area of the sorbent. From the activity test results, it was found that sorbents prepared from coal fly ash and oil palm ash have the highest SO₂ absorption capacity. Scanning electron microscope (SEM) analysis showed that the sorbent was composed of a compound with a high structural porosity, while an X-ray diffraction spectrum showed that calcium aluminum silicate hydrate compounds are the main products of the hydration reaction.     

Measurement of wastewater treatment efficiency by fluorescence and UV absorbance

The degree of chemical treatment in terms of removal of organic matter from different wastewaters has been investigated by employing potassium ferrate (K₂FeO₄) and ozone in various combinations. The study was performed in both the batch and the continuous flow systems. The treatment efficiency was determined through three different methods, i.e., chemical oxygen demand (COD), fluorescence and ultraviolet (UV) absorption. Fluorescence and UV absorption techniques were employed due to their specificity in measurement of humic substances, aromatic compounds and heterocyclic systems, whereas COD is a general parameter for the estimation of total organic matter. Fluorescence and UV absorbance values were correlated with respective COD values.Abdul Bari is with the Department of ChemistryShaukat Farooq is with the Department of Civil Engineering     

Synthesis of maximum water recovery network for batch process systems

Development of maximum water recovery (MWR) networks for continuous processes based on Pinch Analysis has been rather well established. In contrast, less work has been done on the water minimisation problem for batch process systems. This work presents a two-stage procedure for the synthesis of an MWR network for a batch process system, covering both mass transfer-based and non-mass transfer-based water-using processes. The first stage of the synthesis task is to locate the various network targets, which include the overall and interval-based minimum utility targets (fresh water and wastewater flows) as well as storage capacity target using the newly developed time-dependent water cascade analysis (WCA) technique. In the second stage, a new tool called the time-water network is introduced to help in the development of the MWR network to achieve the established utility targets. This new network representation has an advantage of clearly depicting the time-dependent nature of a batch water network.     

Production of surfactin using pentose carbohydrate by Bacillus subtilis

Interest in microbial surfactants has been steadily increasing in recent years due to their diversity, mass production possibility, selectivity, performance under extreme conditions and potential applications in environmental protection. In this study two pentose sugars (xylose and arabinose) were investigated for the submerged fermentation (SmF) of Bacillus subtilis in surfactant production medium for bio-surfactant surfactin production. An excellent vegetative growth of B. subtilis (× 10¹⁰ CFU/mL) was observed for xylose and arabinose containing medium which were comparable to glucose supplemented medium. Low growth (× 10⁸ CFU/mL) was found when medium was not supplemented with any of the sugars. Surfactin production in xylose, arabinose and glucose containing medium was 2700, 2600 and 2000 mg/L, respectively, whereas, medium without any sugar showed low surfactin (700 mg/L) production. These results clearly indicate the effect of pentose sugars on production of surfactin. Gradual depletion of the xylose and arabinose were confirmed by HPLC analysis during the growth phase of the strain that ultimately produced the surfactin.     

Diversity in the later Paleogene proboscidean radiation: a small barytheriid from the Oligocene of Dhofar Governorate,Sultanate of Oman

Despite significant recent improvements to our understanding of the early evolution of the Order Proboscidea (elephants and their extinct relatives), geographic sampling of the group’s Paleogene fossil record remains strongly biased, with the first ~30 million years of proboscidean evolution documented solely in near-coastal deposits of northern Africa. The considerable morphological disparity that is observable among the late Eocene and early Oligocene proboscideans of northern Africa suggests that other, as yet unsampled, parts of Afro-Arabia might have served as important centers for the early diversification of major proboscidean clades. Here we describe the oldest taxonomically diagnostic remains of a fossil proboscidean from the Arabian Peninsula, a partial mandible of Omanitherium dhofarensis (new genus and species), from near the base of the early Oligocene Shizar Member of the Ashawq Formation, in the Dhofar Governorate of the Sultanate of Oman. The molars and premolars of Omanitherium are morphologically intermediate between those of Arcanotherium and Barytherium from northern Africa, but its specialized lower incisors are unlike those of other known Paleogene proboscideans in being greatly enlarged, high-crowned, conical, and tusk-like. Omanitherium is consistently placed close to late Eocene Barytherium in our phylogenetic analyses, and we place the new genus in the Family Barytheriidae. Some features of Omanitherium, such as tusk-like lower second incisors, the possible loss of the lower central incisors, an enlarged anterior mental foramen, and inferred elongate mandibular symphysis and diminutive P₂, suggest a possible phylogenetic link with Deinotheriidae, an extinct family of proboscideans whose origins have long been mysterious.     

Label-free colorimetric nanosensor with improved sensitivity for Pb2+ in water by using a truncated 8–17 DNAzyme

• Unmodified-AuNP based, colorimetric nanosensor was constructed for Pb²⁺ detection. • 5-nucleotide truncation in DNAzyme made complete substrate detachment upon Pb²⁺. • Ultrasensitive and selective detection of Lead (II) was achieved with 0.2×10^-9 mol/L LOD. Water pollution accidents, such as the Flint water crisis in the United States, caused by lead contamination have raised concern on the safety of drinking water distribution systems. Thus, the routine monitoring of lead in water is highly required and demands efficient, sensitive, cost-effective, and reliable lead detection methods. This study reports a label-free colorimetric nanosensor that uses unmodified gold nanoparticles (AuNPs) as indicators to enable rapid and ultra-sensitive detection of lead in environmental water. The 8–17 DNAzyme was truncated in this study to facilitate the detachment of single-stranded DNA fragments after substrate cleavage in the presence of Pb²⁺. The detached fragments were adsorbed over AuNPs and protected against salt concentration-induced aggregation. Accordingly, high Pb²⁺ would result in rapid color change from blue to pink. The established sensing principle achieved a sensitive limit of detection of 0.2×10^-9 mol/L Pb²⁺, with a linear working range of two orders of magnitude from 0.5×10^-9 mol/L to 5×10^-9 mol/L. The selectivity of the nanosensor was demonstrated by evaluating the interfering metal ions. The developed nanosensor can serve as a substitute for the rapid analysis and monitoring of trace lead levels under the drinking water distribution system and even other environmental water samples.     

Trichoderma harzianum: a green sorbent for Pb(II) uptake from aqueous solutions

This investigation describes the use of specially cultivated, nonliving biomass of Trichoderma harzianum as a biosorbent for the batch removal of Pb(II) from a stirred system under different experimental conditions. The metal removal depended upon pH, sorbent particle size, initial Pb(II) concentration, shaking speed, and sorption time. The optimal experimental conditions for the removal of Pb(II) by T. harzianum with an initial metal concentration of 100 mg L^?1 were obtained at a particle size of 53 μm, a pH of 4.5, a shaking speed of 200 rpm, and a contact time of 720 min. The results were analyzed in terms of adsorption isotherms and kinetic models. The Freundlich isotherm model and pseudo second-order model fitted well in the data. T. harzianum proved to be a good biomaterial for accumulating Pb(II) from aqueous solutions (q = 460 mg g^?1).     

Modeling and simulation of landfill gas production from pretreated MSW landfill simulator

The cumulative landfill gas (LFG) production and its rate were simulated for pretreated municipal solid waste (MSW) landfill using four models namely first order exponential model, modified Gompertz model, single component combined growth and decay model and Gaussian function. Considering the behavior of the pretreated MSW landfill, a new multi component model was based on biochemical processes that occurring in landfilled pretreated MSW. The model was developed on the basis of single component combined growth and decay model using an anaerobic landfill simulator reactor which treats the pretreated MSW. It includes three components of the degradation i.e. quickly degradable, moderately degradable and slowly degradable. Moreover, the developed model was statistically analyzed for its goodness of fit. The results show that the multi components LFG production model is more suitable in comparison to the simulated models and can efficiently be used as a modeling tool for pretreated MSW landfills. The proposed model is likely to give assistance in sizing of LFG collection system, generates speedy results at lower cost, improves cost-benefit analysis and decreases LFG project risk. It also indicates the stabilization of the landfill and helps the managers in the reuse of the landfill space. The proposed model is limited to aerobically pretreated MSW landfill and also requires the values of delay times in LFG productions from moderately and slowly degradable fractions of pretreated MSW.     

Phytoaccumulation prospects of cadmium and zinc by mycorrhizal plant species growing in industrially polluted soils

The natural vegetation growing along a wastewater channel was subjected to analyze the uptake of Cadmium (Cd) and Zinc (Zn) and their subsequent accumulation in aboveground and underground plant parts. Species which were mycorrhizal and growing in soils receiving industrially contaminated wastewater were collected along with their rhizospheric soil samples. The nearby uncontaminated control (reference) area was also subjected to sampling on similar pattern for comparison. Both Cd and Zn concentrations were significantly higher in soils of the study area as compared to the reference site. Five plant species i.e. Desmostachya bipinnata, Dichanthium annulatum, Malvastrum coromandelianum, Saccharum bengalense, and Trifolium alexandrinum were analyzed for metal uptake. The maximum phytoaccumulation of Cd was observed in Desmostachya bipinnata (20.41 μg g⁻¹) and Dichanthium annulatum (15.22 μg g⁻¹) for shoot and root tissues, respectively. However, Malvastrum coromandelianum revealed maximum Zn accumulation for both the shoot and the root tissues (134 and 140 μg g⁻¹, respectively). The examination of cleared and stained roots of the plants from both the areas studied revealed that all of them were colonized to a lesser or a greater degree by arbuscular mycorrhizal (AM) fungi. The Cd hyperaccumulating grasses i.e. Desmostachya bipinnata and Dichanthium annulatum, from study area had smaller root:shoot (R/S) ratio as compared to those growing on reference area indicating a negative pressure of soil metal contamination. The lower R/S ratio in the mycorrhizal roots observed was probably due to increased AM infection and its mediatory role in soil plant transfer of heavy metals. Furthermore, comparatively lower soil pH values in the study areas may have played a key role in making the overall phytoavailability of both the metals. Consequently variations in Cd and Zn tissue concentration among species were observed that also indicate the phytoaccumulation potential of the native species.